How to Find Hidden Piping and Valves
Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Below are some of the ways that you can be able to find out where the various valves are located.
There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.
Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. Such gas systems usually have the shutoff valve near the water heater or the furnace.
For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.
In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. For such valves using a metal detector may come in handy since they are usually metallic in nature. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.